Aluminium Decking Substructure
The Aslon Any Deck substructure system is designed specifically for universal, straight forward and fast assembly of wood composite, synthetic, bamboo and hardwood decking that has been provided with a groove of at least 3.5mm in height and 8mm in depth.
SAVE ON INSTALLATION TIME WITH THE GROOVE
With the Alson Any Deck substructure system you will save at least 50% on installation time.
The system can be used for wood composite, synthetic, bamboo and hardwood decking. The aluminium beams are always straight unlike the hardwood alternative.
WHAT MATERIALS DO YOU NEED?
Simply contact us with your measurements and decking board type. We will then calculate all the items required for installation.
Any Deck Aluminium Beams are always straight and provide a very light weight substructure for the decking boards. Installation can be on our Aslon Rubber Pads or our Adjustable Slope Correction Pedestals.
Always install the aluminium beams (subconstruction) in accordance with the installation manual to which reference is made by the manufacturer of the decking boards in question.
40 x 40 x 2400mm
35 x 23 x 2000mm
Fastening clips are used to fasten the first and last boards of the layout. Secured to the aluminium beams with one simple to use bolt they ensure secure installation of the first and last decking boards.
Start / End Clips
End Fastening Clips are used to fasten the first and last boards of the layout. Secured to the aluminium beams with one simple to use bolt they ensure secure installation of the first and last decking boards.
Note: When Installing the aluminium in framed sections for leveling on adjustable supports screws must be used at the first and last boards to secure to the aluminium.
Couplers are available where aluminium beams need to be joined. Couplers are fixed using the same quick fit connection as the fastening clips keeping installation time to a minimum and ensuring a secure connection.
Installation on our Aslon rubber pads is quick and easy. Aslon rubber pads are 100 x 100 x 10mm in size and will protect the substrate below from damage as well as allowing for free drainage.
When installing on Aslon Pads the decking will simply follow the existing fall of the roof. Please contact us if you have an area with multiple fall directions. Supports should be placed under the aluminium beams no more than 500mm apart for 40x40 beams.
Adjustable Pedestals & Cradles
Installation on our adjustable supports and cradles allows for complete adjustment of the deck level. Using this system the decking can be installed level by adjusting the height of the supports to overcome the drainage falls of the roof. Our slope correction supports automatically adjust for the angle of drainage and fit perfectly to the aluminium beams.Supports should be placed under the aluminium beams no more than 500mm apart for 40x40 joists.
Multi Brackets can be used to attached the aluminium beams to almost any surface including timber, concrete and even existing pavers.
The Multi Bracket can also be used to connect aluminium beams together at 90 degree angles where required.